Meaning
Precision dimensional inspection instruments verify the internal diameter limits of machined holes, bores, and internal threads. Inserting a plug gauge into a cylindrical feature determines whether internal dimensions conform to specified maximum and minimum tolerance boundaries. Metrology standards specify cylindrical, progressive, and double-ended configurations tailored for varied shop floor inspection tasks.
The tool evaluates internal size compliance instantly but cannot quantify exact numerical variances or out-of-round conditions within the bore.
Dual Limit
Fixed limit bore inspection relies on two distinct precision ends designated as the Go member and the No-Go member. A double-ended plug gauge requires the Go end to enter the hole under hand pressure while the No-Go end must be prevented from entering beyond its chamfered lead. The Go member checks the maximum material condition corresponding to the smallest allowable hole diameter, whereas the No-Go member verifies the least material condition for the largest allowable diameter.
Production inspectors discard workpieces immediately if the Go member fails to enter or if the No-Go member slips completely into the bore.
Calibration Interval
Friction generated during repeated insertions causes material loss along the Go cylinder surface.
Material Selection
Tool manufacturers fabricate these inspection devices using hardened tool steel, tungsten carbide, or ceramic materials to resist abrasive wear. Carbide plug gauge members cost significantly more than steel alternatives but deliver up to ten times the operational lifespan in abrasive cast iron or glass-filled resin machining environments. Procurement orders specify chrome plating or carbide tips when high volume production runs threaten to wear down steel tools rapidly.
Quality control procedures require immediate retirement of worn tools to protect factory shipments from dimensional rejections.