Meaning
International standardized specifications published by the International Organization for Standardization govern the design, tolerance limits, and functional verification of plain limit gauges. Adherence to ISO 1938-1 establishes unified rules for Go and No-Go gauge manufacturing, defining allowable wear limits and manufacturing tolerances for cylindrical and plate gauges. The standard establishes how workpiece limits relate to gauge physical dimensions to prevent acceptance of non-conforming features.
Its coverage applies exclusively to plain linear dimensions, excluding thread features and complex spline geometries from its technical domain.
Verification Rule
Geometrical product specifications dictate that physical limit gauges must enforce Taylor’s principle of tolerance verification. Under ISO 1938-1, a Go gauge checks the combined effect of size, roundness, and straightness simultaneously at the maximum material limit of a feature. The No-Go gauge checks only the actual local diameter at the least material limit to ensure the workpiece does not exceed lower stability bounds.
Workplace inspectors deploy these tools to achieve rapid non-destructive conformance decisions on production lines. Contracting parties rely on these standardized rules to resolve inter-laboratory measurement disputes without costly litigation.
Tool Allocation
Manufacturing tolerances for new gauges under this framework are derived directly from workpiece tolerance magnitudes.
Wear Boundary
Continuous contact with machined workpieces removes material from gauge surfaces, altering functional dimensions over time. Compliance with ISO 1938-1 requires manufacturers to incorporate a dedicated wear allowance on Go gauges to extend operational lifespans before dimensional degradation causes false rejections. Ring gauges and plug gauges reaching their maximum wear limit must be removed from production service immediately to maintain inspection integrity.
Factory quality manuals reference this standard to set internal recalibration schedules and tool retirement thresholds.