Meaning
Systematic checks of the integrity of protective locking devices on shipping units are essential for maintaining the chain of custody. A container seal verification involves matching the unique identification number stamped on the high-security seal against the number listed on the bill of lading. This action confirms that the container has not been opened or tampered with since it was sealed at the origin.
It is a critical check that takes place at every major transfer point, including gate entry and port discharge.
Inspection Protocol
Standard operating procedures require a physical assessment of the locking mechanism at each transition of the cargo. During the process of container seal verification, inspectors perform a physical pull test to ensure the bolt or cable has not been cut and glued back together. High-resolution photographs are captured to document the serial number and the physical state of the seal.
This information is recorded on the gate pass or the interchange receipt to establish a continuous record of security.
Security Discrepancy
Discrepancies in the identification numbers or signs of damage to the mechanism indicate potential unauthorized access to the cargo. If a container seal verification reveals a broken or missing seal, the receiver must halt the delivery process immediately. The container must then be moved to a secure area for a joint survey where customs officials and insurance adjusters can inspect the contents.
Any delay in reporting a compromised seal can void insurance coverage for missing or altered goods.
Legal Protection
Documenting the status of the seal provides vital defense against claims of theft. Successful container seal verification shields the carrier from liability for losses discovered after delivery.